Our Products
HAND PUMP
Hand test pumps serve as pressure generators for the testing, adjustment, and calibration of mechanical and electronic pressure measuring instruments through comparative measurements. These pressure tests can be carried out in the laboratory or workshop, or on-site at the measuring point.
SPMK
SPMK213H Low Pressure Comparator
Pressure Range: (-0.95-25) bar; (-14-375) psi
Or: (-0.95-40) bar; (-14-600) psi
Adjustment Resolution: 1mbar; 0.1kPa
Connection: M20x1.5 Optional
Dimension: (280×170×140) mm
Net weight: 2.4Kg
Media: Air
Accessories: sealing component (10pcs), plug (2pcs)
SPMK
SPMK213E High Pressure Comparator
SPMK213E High Pressure Comparator 70bar 1000psi
Type: Pneumatic
Pressure range: (-0.95～70)bar, (-14～1,000)psi
Connection: M20×1.5, 1/4NPT / BSP, 1/2NPT / BSP Female
Dimension: (400×262×170) mm
Net weight: 5.5Kg
Accessories: Plugs, O rings, Carrying Case(optional)
SPMK
SPMK213L High Pressure Comparator
Pressure Range: (-0.85-600) bar; (-12.5-9,000) psi
Adjustment Resolution: 0.2bar; 20kPa
Connection: M20x1.5 Optional
Dimension: (365×195×145) mm
Net weight: 3.9Kg
Media: Oil
Accessories: sealing component (10pcs), plug (2pcs)
high pressure hose (1pcs)
BETA MARTEL
MECP10K
The MECP10K hydraulic hand pump provides a hydraulic pressure source up to 10,000 psi. A wide variety of pressure media may be used: distilled water, mineral based hydraulic oil, or up to hydraulic oil 100 (30W). The seals are fluorocarbon and the only other non-metallic materials are plastic.